For years, one of the things I’ve loved most about FlightScope products is that they give you a professional-level experience without requiring any subscriptions.
You buy the hardware once, and you’re good to go.
But if you’ve been eyeing the Mevo Gen 2, you’ve probably noticed there are two optional upgrades available: the Pro Package and Face Impact Location.
These aren’t cheap add-ons. At retail, they’ll set you back $1,000 and $499 respectively – or $1,499 if you bundle them together.
But here’s the thing: FlightScope runs sales constantly, and with our discount code BREAKINGEIGHTYPLUS, you can get significantly better pricing that makes these upgrades much more compelling (You should be looking to get the combination of Face Impact and Pro Package for $807 after regular sales and discounts).
So the question becomes: are they actually worth it? And more importantly, who should buy them?
Let’s break it all down.
Go With the FlightScope Mevo Gen 2, Not the Discontinued Mevo Plus.
The Mevo Plus has been discontinued. You may still find remaining stock, and existing owners can still use Pro Package and Face Impact Location. But if you’re buying today, I’d get the Mevo Gen 2.
The price difference is minimal, and the Gen 2 brings some worthwhile hardware upgrades: up to six hours of battery life, USB-C charging, an updated body design, and a slightly larger radar that helps with accuracy indoors. These are moderate improvements rather than a completely different experience, but they make the newer model the easy choice for me.
It’s also the current model I’d expect FlightScope to focus on going forward. That doesn’t mean existing Mevo Plus owners need to replace theirs; both use the FS Golf platform, and the October 2026 app refresh benefits both.
So if you’ve got a Mevo Plus and you’re happy with it? I don’t think there’s a big reason to switch them out.

For more on the hardware, read my full Mevo Gen 2 review. You can also see how FlightScope stacks up against the Square Omni in this comparison.
Now, let’s look at whether the two software upgrades are worth adding.
What You Get with a Base Mevo Gen 2

Before we talk about the upgrades, it’s important to understand what you’re getting out of the box.
The Mevo Gen 2 provides a broad set of ball-flight and performance data before you buy either upgrade, including:
- Ball speed
- Launch angle
- Launch direction
- Spin rate
- Spin axis
- Apex height
- Carry distance
- Total distance
- Flight time
- Land angle
- Offline
- Smash factor
- Club speed
- Angle of attack
- Spin loft
One clarification: not every number on this list is a directly measured input. Smash factor, for example, is a ratio of ball speed to club speed, and total distance includes modeled roll. FlightScope combines radar and camera tracking with calculations to give you the full picture.
For most casual golfers who just want to play virtual rounds or get general feedback on their shots, this base package is more than enough. You can see exactly how far you’re hitting each club, dial in your distances, and have a blast playing courses in your simulator, with no additional subscription fees necessary to use third-party software like e6 or GSPro.
But if you’re someone who wants to really dig into the technical side of your swing and understand what’s happening at impact? That’s where these upgrades become interesting.
The Pro Package: Welcome to the D-Plane
The Pro Package adds 11 additional data parameters that focus on club data and what’s happening at impact.

Here’s what you get:
- Club path
- Face to path
- Face to target
- Dynamic loft
- Vertical swing plane
- Horizontal swing plane
- Low point
- Vertical descent angle
- Curve
- Club speed profile
- Club acceleration profile
This is what’s known as the complete d-plane dataset – essentially everything you need to understand the relationship between how the club is moving and how it’s impacting the ball.
Why Does this Matter?
If you’re working with a coach or really trying to dial in specific aspects of your swing, this data becomes invaluable.
Want to know if you’re coming over the top? Club path will tell you.

Trying to figure out why you can’t hit a draw? Face-to-path shows you exactly what’s happening at impact.
Working on strike quality with your irons? Low point data helps you see if you’re bottoming out in the right spot.
This is the kind of information that tour players and their coaches use daily. And now you can have it in your garage or at the range for a fraction of what you’d pay for a lesson package analyzing this same data.
The FlightScope Pro Package Software Experience

One thing that really stands out is how well FlightScope presents this data in the FS Golf app.
You get both 2D and 3D club animations that show exactly what’s happening in your swing. The app lets you customize how you view the data, set margins for what you consider acceptable, and track trends over time.

It’s the same professional software experience you get with the $15,000 FlightScope X3c, just at a consumer price point.
The Pro Package also includes access to FlightScope’s Trajectory Optimizer (iOS only) and Environmental Optimizer, plus FS Golf PC 2.0 software (a $99 value on its own).

Importantly, all 11 data parameters work for both full swing shots and chipping. This makes it valuable for short game practice as well, not just bombing drivers on the range.
The October 2026 FS Golf App Update Makes Pro Package More Useful
One of my favorite things about FlightScope is that the software keeps improving. The October 2026 refresh is a good example: a better-looking app, easier setup, and more useful ways to practice with your data.
It still isn’t the most modern-looking software in golf. I’ve been very impressed by the look and feel of Foresight Premier, for instance, but that’s a minimum of $199 a year, and it has more expensive hardware.
But the customization and practice tools are a big part of why I like this platform, and this update makes the overall experience better.
Smart Data Margins: Another Reason to Get Pro Package
Smart Data Margins requires the Pro Package on Mevo Gen 2 and Mevo Plus. It isn’t included with the base unit (bummer), and buying Face Impact Location alone doesn’t unlock it.

Set acceptable ranges for each club, or have the app build them around your ability. Smart Gapping can use a benchmark such as your 7-iron carry and location to establish targets across the bag; saved sessions and CSV imports are also supported.
This gives the numbers context. Instead of just staring at a screen full of data, you have a clearer idea of what you’re trying to achieve. I wish this were standard, but for existing Pro Package owners, it’s a welcome addition without another upgrade charge.
The Rest of the Refresh
- Clearer screens and quicker starts: High-contrast Light Mode helps outdoors. Save club, ball, and tile defaults, and review monthly practice summaries.
- A more flexible range: Customize trees, lighting, camera position, and shot trails. Club colors, dispersion overlays, and consolidated display controls make sessions easier to review.
- More varied practice: Interactive and randomized targets help you change the shot you’re attempting instead of hitting the same club repeatedly.
- Normalize Shot: Recalculate live or saved shots under standardized conditions for more useful comparisons.
- Better swing review: The gallery organizes clips and automatic monthly highlights. Synchronized side-by-side playback supports drawings and voiceovers for sharing with a coach.
- More on PC: PGA Challenge, Range Competition, and Long Drive Competition bring additional practice formats to the desktop.
The app refresh is free; Smart Data Margins still needs the paid Pro Package license on these Mevo models. FS Golf PC 2.0 is included with Pro Package. Optional third-party simulator software and other services may have separate fees.

I’ve covered the updated experience in more detail in my Mevo Gen 2 review. FlightScope also has a full breakdown of the app refresh.
Face Impact Location: See Where You’re Actually Striking It
The Impact Detection add-on (officially called Face Impact Location) does exactly what it sounds like – it shows you precisely where on the clubface you’re making contact.
This uses FlightScope’s Fusion Tracking technology, which combines radar and high-speed camera data to pinpoint your strike location.
Impact Detection continues to perform extremely well for me. And one of its biggest conveniences is that you don’t need silver dots or reflective stickers on your clubs to get strike-location feedback. FlightScope confirms that the Gen 2 tracks impact location without club stickers.

That’s separate from the ball requirement indoors: for accurate spin in limited flight, use aluminum ball stickers or Titleist RCT balls. Sticker-free clubs don’t mean you can ignore indoor ball setup.
Face Impact Location is a separate purchase from Pro Package, and FlightScope now confirms that Pro Package isn’t required to use it. You can prioritize strike feedback alone, or combine both upgrades for club-delivery and strike-location analysis.
Face Impact Location provides:
- Lateral impact position
- Vertical impact position
- Heat mapping visualization
- Shot grouping displays
The heat maps are particularly cool. After a session, you can see the complete distribution of your strike patterns for any club in your bag. Are you consistently catching it thin? Toe strikes? The heat map makes it immediately obvious.

For individual shots, you see exactly where you struck the ball with a precise dot on a clubface diagram, paired with all your other data for that shot.
Why Impact Location Matters
Here’s the reality: even small misses on the clubface can dramatically affect your results.
Off-center contact can cost distance and change launch, spin, and curvature. The effect depends on the club and the strike; with a driver, for example, a toe strike can add draw curvature through gear effect. The useful part is seeing your contact point alongside the resulting shot data.
Being able to see this data helps you understand why shots that “felt okay” didn’t produce the results you expected.
It’s also incredibly valuable for club fitting. If you’re consistently striking it off-center, maybe you need different lie angles or shaft lengths.
The Lighting Requirement
One important caveat: Face Impact Location requires adequate lighting to work properly. FlightScope recommends a minimum of 300 lux in your hitting area.
If you’re outdoors in sunlight, no problem. But if you’re in a basement simulator setup with dim lighting, you may need to add some lights to get consistent readings.
Get the FlightScope Pro Package and Impact Detection Bundle for nearly 50% off MSRP and unlciok the full D-Plane suite of metrics.
Use code BREAKINGEIGHTYPLUS to save 5%.
The Pricing Reality: Don’t Pay Retail
Here’s where things get interesting from a value perspective. FlightScope is a little cagey with their pricing, as you basically never need to pay full price. Sales are frequent, and typically you can use our FlightScope discount code BREAKINGEIGHTYPLUS to save an additional 5% off that.
Retail pricing:
- Pro Package: $1,000
- Face Impact Location: $499
- Bundle: $1,499
Examples of previous sale pricing (check current offers):
- Pro Package: $599
- Face Impact Location: $299
- Bundle: $850
Those example prices after BREAKINGEIGHTYPLUS (5% off, when eligible):
- Pro Package: $569.05
- Face Impact Location: $284.05
- Bundle: $807.50
These are examples of deals we’ve seen, rather than a guarantee of today’s standalone add-on prices. Check the current offer before buying, especially during November when a complete hardware-and-software bundle may be a better deal.
Even at sale prices with our discount, these represent a significant investment on top of the base unit cost. But the value proposition is pretty incredible when you consider what you’re getting.
Is the Pro Package or Impact Detection Worth It? It Depends On Your Goals
This is where I need to be honest about who should and shouldn’t buy these upgrades.
You Probably DON’T Need Them If:
- You’re primarily using your launch monitor for sim golf and just having fun
- You’re not actively working on swing changes with a coach
- You just want to know your distances and practice casually
- You’re on a tight budget, and the base unit already stretches it
For the recreational golfer who wants to play virtual rounds and occasionally check their distances at the range, the base Mevo Gen 2 is absolutely fine. These upgrades would be overkill.
You SHOULD Consider Them If:
- You’re seriously working on your game and want every advantage
- You work with a coach who uses data-driven instruction
- You’re trying to dial in very specific swing changes
- You’re doing any kind of club fitting work
- You love getting deep into the numbers and analytics
- You want the most comprehensive data set possible at this price point
The Value Proposition is Actually Insane

Here’s the thing that really stands out to me: with both upgrades combined, you’re getting an unusually comprehensive set of club, ball, and impact-location data for the money.
The combination of detailed club analysis, strike-location heat maps, indoor/outdoor use, and no required FlightScope subscription makes this a compelling package. Getting that strike feedback without marking every club is another practical advantage.
During the November 2026 promotion, a Mevo Gen 2 with Pro Package and Impact Detection is $1,999 before code BREAKINGEIGHTYPLUS, or $1,899.05 after the additional 5% discount (approximately $1,899).
The base Gen 2 is $1,149 during the same promotion, or $1,091.55 with the code. If you want both upgrades, compare the complete bundle against buying everything separately.
Just a year or two ago, a maxed-out Mevo Plus would run you around $2,650 on average, with an MSRP of about $3,600.
So you’re now getting a better product, with more capabilities, for significantly less money. That’s pretty remarkable.
The core FlightScope experience doesn’t require a subscription. Pro Package and Face Impact Location are one-time software purchases linked to your device; optional services and third-party simulation can have their own charges.
My One Critique: Club Path Should Be Standard
My only real complaint is that I wish club path data was included in the base package.
It’s such a fundamental metric that even some $500 launch monitors provide. Having to pay $569 extra to get it feels like it should be baked into the base experience.
But considering how much other data you’re getting with the Pro Package, and the fact that FlightScope continues to add features via free software updates, it’s a relatively minor gripe.
Who Should Buy What?
Let me give you my recommendations for different golfer profiles:
- Casual Golfer / Sim Enthusiast: Base Mevo Gen 2 (approximately $1,092 with code during November) – save your money for more E6 courses or GSPro
- Improving Player / Regular Practicer: Mevo Gen 2 + Pro Package – club-delivery data and Smart Data Margins make practice more focused. Compare current bundle pricing if you also want Impact Detection.
- Serious Competitive Golfer / Working with Coach: Mevo Gen 2 + Pro Package + Impact Detection (approximately $1,899 with code during November) – combine club-delivery analysis with strike feedback
- Club Fitter / Teaching Pro: The full package makes the most sense for detailed instruction and fitting, provided your space and setup meet FlightScope requirements
Final Thoughts on FlightScope Pro Package and Impact Detection
These software upgrades can feel like a lot on top of a launch monitor. That’s why I’d compare the complete bundle before buying the hardware and add-ons separately.
But when you step back and look at what you’re actually getting – professional-level club data, precise impact location detection, comprehensive d-plane information, advanced software features, and no ongoing subscription fees – the value becomes clear.
These upgrades make the Mevo Gen 2 a much more useful tool for understanding your swing. Smart Data Margins adds context to the numbers, while Face Impact Location connects your delivery to where you actually hit the ball.
The fact that FlightScope regularly discounts these packages and allows you to add them at any time (they’re lifetime licenses that link to your device) also takes away some of the pressure of the decision.
You can buy the base unit, use it for a few months, and then decide if you want to upgrade. The Pro Package and Impact Detection will still be there when you’re ready.
For me, if I’m investing in a launch monitor and I’m serious about improving my game, I’d find a way to get the full package. The data is just too valuable to pass up.
But if you’re on the fence? Start with the base unit. Get comfortable with it. See how you use it. Then make the call on whether you need more.
For new buyers, the Mevo Gen 2 is my recommendation. The discontinued Mevo Plus may still turn up as remaining stock, but the small potential saving isn’t enough to steer me away from the current model.
If you already own a Mevo Plus, though, this is still relevant: both software upgrades remain compatible, and the updated FS Golf app makes your existing setup more useful, too.
Get the FlightScope Pro Package and Impact Detection Bundle for nearly 50% off MSRP and unlciok the full D-Plane suite of metrics.
Use code BREAKINGEIGHTYPLUS to save 5%.
This page contains affiliate links. This means that if you click a link and buy one of the products on this page, we may receive a commission (at no extra cost to you!) This doesn’t affect our opinions or our reviews. Everything we do is to benefit you as the reader, so all of our reviews are as honest and unbiased as possible.
Recent Updates:
November 3rd, 2026: Major update. Included new features and reviews from the October 2026 FS Golf app update. Updated pricing to reflect current sale and market prices. Removed most references to the now-discontinued Mevo Plus.


1 Comment
great article!
I have the Mevo+. Discount above states $807.50 for pro and face. Link states $975. Confused